Titanium flat washers — reference configuration 1

Reference configuration 1Photograph from the supplied product catalogue. Final specification by written quote.

Industry reference photograph. The ordered hole / outer diameter / thickness are governed by the written specification.

QF-WASHER · Titanium fasteners

Titanium flat washers

Plain titanium washers for load distribution and separation in rack assemblies. Specify hole diameter as well as nominal bolt size: a nominal quarter-inch washer is not a fully defined component.

Batch minimum: 1,000 pcs / configuration
Supply route: Workshop configuration first; drawing-confirmed supply
Shipping: Quoted to your destination, separately

$0.35 / pc

Budget reference at 1,000 pcs · goods subtotal $350

Budget only. Final price depends on confirmed drawing, material, factory availability and packing. Freight, duties, taxes, tooling and special tests are extra.

Need qualification samples? Ask for a separately priced sample and shipping quote before the production batch.

Specification & configuration

Reference information for a precise inquiry. Catalogue ranges are not a promise that every combination is available. The accepted drawing and written quotation govern the supplied part.

Material request	Commercially pure titanium Grade 2.
1/4 in reference	0.750 in OD × 0.040 in thick · 19.05 × 1.016 mm; hole clearance to confirm.
5/16 in reference	1.000 in OD × 0.050 in thick · 25.4 × 1.27 mm; hole clearance to confirm.
3/8 in reference	1.000 in OD × 0.063 in thick · 25.4 × 1.600 mm; hole clearance to confirm.
Edge and flatness	Deburr, hole / OD tolerances, flatness and surface requirements agreed per batch.
Packing	Bulk counts per one hole × OD × thickness × grade combination.

Selected batch-price references

USD per piece at the listed minimum, for one identical size and grade. These are budget estimates, not confirmed stock offers. Freight, taxes, special inspection and custom packing are excluded.

Configuration	Budget / pc	MOQ per size	Goods subtotal
1/4 in · OD 0.750 × t0.040 in	$0.35	1,000 pcs	$350
5/16 in · OD 1.000 × t0.050 in	$0.54	1,000 pcs	$540
3/8 in · OD 1.000 × t0.063 in	$0.59	1,000 pcs	$590

Where this part is used

Clamps, collars and rack fastener assemblies.
Thread-matched maintenance kits.
Repeated industrial washer replenishment orders.

Check before use

Flat washers do not act as lock washers or create an electrical-isolation barrier.

What to send for an accurate quote

Actual ID, OD and thickness, not only nominal size.
Tolerances and grade documentation.
Quantity per size and edge finish.
Mating fasteners and packaging.

We prioritise existing workshop designs. If no drawing is available, send clear photographs with a ruler or a measured sketch. We will identify the missing dimensions before confirming production.

Send this part for quotation →

Batch supply, inspection & delivery

One approved configuration

MOQ applies to each identical size, grade and drawing revision. Mixed variants cannot automatically be combined to meet a per-size minimum. Sample and tooling charges, if needed, are separate.

Written approval before production

Confirm dimensions, material, quantity, inspection and packing on the quotation. Material documents and tests must be requested and agreed in advance; no blanket certification is implied.

Freight based on packed size

Shipment is quoted using destination, actual / dimensional weight and packing. Long hooks, frames and baskets may cost more by volume than by mass. Duties and import taxes are not included unless expressly agreed.

Lead time is confirmed per order

Production timing follows drawing approval, sample acceptance where required and agreed payment. No overseas stock or fixed dispatch date is promised by this catalogue.

Specify the matching components

Order interfaces together: basket-to-hook, disc-to-spline and bolt-to-thread. Accessories below are quoted separately.

Send the drawing. Define the batch.

Titanium flat washers · QF-WASHER · MOQ 1,000 pcs per configuration