Custom heavy-duty rectangular anode basket

Name: Custom heavy-duty rectangular anode basket
Brand: Argon
SKU: QB-C450

For tank retrofits, plating-equipment builders, non-standard bus bars, and heavy loads. The reference build is 450 × 150 × 75 mm with mesh on all four sides, a solid bottom, and reinforced edges and top frame.

This is a drawing-first product: we confirm a 2D drawing with you before any metal is cut, then quote the first article and the batch on the same drawing.

Reference specQB-C450

Reference size: 450 × 150 × 75 mm
Body: Grade 1, 0.80 mm
Heavy option: 1.27 mm mesh
Faces: Four-side mesh
Hook: 50 A or 75 A target
Drop: 120 mm

Quoted at 1 first article + 19 · also 50 pcs same drawing. Sample first, then batch.

Quote this part Full specification

Reference drawing

Dimensions at a glance

Reference: 450 × 150 × 75 mm, open top
Mesh: SWD 4.8 · LWD 12.7, ≈ 65 %
Hook drop: 120 mm
Opening: 40 mm inside
Hook rating: 50 A and 75 A versions

Dimensions in mm unless marked. Reference values for comparing quotes; production follows the drawing you approve.

Full specification

Code	QB-C450
Reference size	450 × 150 × 75 mm, open top
Material	Body ASTM Grade 1, 0.80 mm; heavy 1.27 mm mesh quoted separately; hooks may be Grade 2.
Construction	Mesh on all four sides, solid bottom plate, reinforced vertical edges and top frame.
Mesh	Target SWD 4.8 mm, LWD 12.7 mm, about 65 % open area.
Hooks	Double contact, two current levels (50 A and 75 A targets), 120 mm drop, 40 mm inside opening.
Documents	2D drawing confirmed before quoting; first article ships with a dimension report, material certificate, weld and packing photos.

Options and variants

Option	What changes
Your dimensions	Any length, width, and depth.
Lids, dividers, cut-outs	Drawn and quoted with the body.
Titanium stud connection	Instead of hooks, for bolted bus bars.
Grade 2 frame	For very heavy loads.

How it is used

Send the tank and bus-bar measurements; we draw the basket.
Approve the drawing and pay the first article.
Fit-test on your line; revise the drawing if needed.
Release the batch on the approved revision.

First-article checks

Key-dimension report on the first article, measured against the agreed drawing.
Material certificate from the titanium supplier for the sample; heat-lot traceability for batch orders.
Close-up photos of welds and contact points, and photos of the packed parts before dispatch.

Each piece protected against crushing, bending, and scratching; every pack labelled with code, size, grade, and quantity.